|
|
 By moving the mouse on the picture to enlarge the picture for more detail
|
‧Power control by RS485 (MODBUS RTU).
‧Select RS232 or RS485 via DIP to control power switch. Maximum 30 IDs can be set. RS232/RS485 baud can be set via DIP.
‧Support power monitoring and can detect if switch status was ON (consumed power over 0.5A will be defined as ON).
‧IR signal will not be transmitted if detected status was ON.
‧If detected switch status was “not” ON, IR signal will be transmitted 3 times (2 seconds interval time between every transmit).
‧IR (infrared) receiving and transmitting. Can learn 8 IR signals.
‧Panel button can control power switch by manual and learn IR signal.
‧Keep last power status when lost power.
‧Once power comes back and if last power status is ON, will transmit IR signal automatically.gnal automatically.
|
Model Name |
IP-1A-10Z, IP-1U-10Z, IP-1B-12Z, IP-1G-10Z |
|
Input Voltage |
IP-1A-10Z, IP-1U-10Z: 100-240VAC 50/60HZ IP-1G-10Z:200-240VAC 50/60HZ IP-1B-12Z: 100-120VAC 50/60HZ |
|
Operating Temperature |
0-40℃ |
|
Operating Humidity |
0-95% |
|
Storage Temperature |
0-60℃ |
|
RS232 Port |
1 |
|
RS485 Port |
1 |
|
IR Receiver |
1 |
|
IR Transmitter Port |
1 |
|
Product Dimension |
150mm*66mm*40mm |
- HE-TX-Transmitter
- HE-RX-Receiver
1. HDMI video signal extender uses TCP/IP technology transmitting video and audio.
2. Supports one to one, one to many, many to many signals distribution. Distribute signals to many transmitters or receivers by Network hubs.
3. Transmitter supports one HDMI output.
4. Ethernet cable CAT5e/6 between transmitter and receiver can go up to 150 meters; the distance between each Network node is 100 meters.
5. Resolutions supported 480i/p,576i/p,720p,1080i/p
6. Built-in 10/100mBase- T Ethernet port, TCP/IP standard transmission protocol. Can extend signals by Network hubs.
7. HDMI 1.3b supported.
8. IR transmission supported. IR controlled devices (opional IR accessory) like blu-ray player or others which connected to transmitter can be controlled by receiver.
9. RS-232 two-way signal transmission. Baud can be set by DIP switch.
10. Max 63 IDs can be created for many-to-many video transmission.
11. Supports HDCP version 1.4, high-bandwidth digital content protection.
12. No software or drivers required.
13. Supports blu-ray DVD24/50/60fs/HD-DVD/xvYCC
14. Video signal auto adjustment supported. Auto adjust video signal strength instead of by-hand adjustment.
15. Max Pixel Clock: 225MHz
16. Max Data Rate: 6.75Gbps
17. LED indicators tell connecting status of device.
